MORE INFORMATION

 
 
Trico High-Viscosity Hand-Held Filtration System with Pneumatic Pump 36934 Image

Trico High-Viscosity Hand-Held Filtration System with Pneumatic Pump 36934

Part Number: 36934
no ratings
0 reviews
 
 
10-15 Business Days Contact Us
$
Contact Us
$4,785.35
4785.35
  • Product Description
  • Customer Reviews
  • Write a Review

In the past choices were very limited when it came to filtering lubricants with viscosities greater than 500 SUS @ 100ºF. The problem with attempting to filter a high viscosity oil with a lower viscosity system is that the pump and filters are not designed to work with higher pressures required to push high viscosity fluids through the system. As a result these low viscosity units operate primarily in “bypass” mode where little if any of the high-viscosity oil gets filtered.

That is where Trico’s High-Viscosity Hand-Held System comes in. This system is specifically designed for high-viscosity fluids associated mainly with gear oils and can filter oils up to 7,500 SUS @ 100ºF (1600 cSt @ 40ºC).

To ensure that the equipment receives the cleanest oil possible, for increased equipment life, Trico’s High-Viscosity Hand-Held Filtration System provides two-stage filtration. The oil flows through the primary filter first, where coarse particulate is removed. Then the fluid flows through the secondary filter where fine particulate and water are removed.

A variety of filter media elements are available to meet recommended manufacturer cleanliness levels.

Options

Model No. Description Motor Type
36934 High-Viscosity Hand-Held - Pneumatic Pneumatic Pump
36971 High-Viscosity Hand-Held - Electric Electric

High-Viscosity Hand-Held System

  •  Differential Pressure Gauges – Indicates when elements need to be changed
  • Oil Sampling Ports – Two sampling ports available to monitor condition of oil
  • Dual Filters – Two-stage filtration for long element life and pump protection
  • Compact – Lightweight design provides flexibility to service equipment located in hard to reach areas
  • Hoses – Heavy-duty PVC

Specifications

Pump Type Industrial Grade Gear Pump or Pneumatic Motor
Flow Capacity 1 GPM
Pump Speed 1725 RPM – Electric
Variable up to 3000 RPM – Pneumatic
Maximum Inlet Vacuum 15″ of Mercury
Hose Sizing @ 2 ft/sec .75″ Diameter Inlet @ 6 feet long
Max. Operating Temperature 150ºF (65ºC)
Pump By-Pass 85 PSI
Filter By-Pass 43 PSI
Maximum Viscosity 1600 cSt @ 40ºF / 7500 SUS
Seal and Gasket Material Viton®
Electrical Service Required 115 Volts, 10 Amps, Single Phase, 60 Hz (electric version only)
Air Inlet Connection 1/4″ NPT Female (pneumatic version only)
Max. Operating Pressure 100 PSI (pneumatic version only)
Weight 50 lbs – Electric
49 lbs – Pneumatic
Dimensions 27″W x 13″D x 17″H

Shipping Dimensions

Weight: 0.00 lbs Length: 0.00 inches Width: 0.00 inches Height: 0.00 inches