Des-Case, 5 gpm, 60 Hz electric motor base model with standard features of 65 psi safety relief valve, 1" and 3/4" ISO B quick connects, 12' hoses, and dual-stage filtration, FC05EB1JB00002

Filter carts are ideal for use on small to medium-sized reservoirs with low flow rates.  Compatible with mineral-based industrial fluids, portable systems such as the filter cart provide a cost effective solution to maintaining fluid cleanliness in multiple applications with the same lubricant.

Heavy duty, lots of options, exceptional value … Des-Case filter carts are uniquely yours, because you pick the options you need for your specific environment and application. Build yours today by simply clicking on the desired options below.

What Is Standard?

• Automatic pressure relief valve
• Non-bypass filter heads which prevent particles from passing by when the filters reach maximum saturation
• Dual-stage filtration
• 12' hose assemblies with various quick connect options
• Pneumatic wheels for easy mobility
• Industrial powder-coated paint
• Heavy-duty cart with oil catch pan
• One-year warranty
• 25 ft cord (for electric motors only)

Application

• Decontaminating systems
• Flushing new or repaired systems
• Dispensing new oil
• Pre-filtering new oil
• Evacuating used oil
• Reservoir top-offs
• Flushing systems
• Collecting oil samples for analysis

INTENDED USE

• To be used for offline, secondary filtration and not inline filtration
• In general industrial environments, both indoors and outdoors (IP rating of 54)
• For filtering mineral-based industrial oils and most synthetic oils with a maximum operating viscosity range of ISO 680 at 100°F/38°C (3,000 ssu/648cSt) within ambient temperature ranges of -15°F to 150°F (-26°C to 66°C)
• Placed at the same level or below the equipment being filtered and within reach of the recommended standard 12 foot hoses
• This system should be stored and used on a level surface, right side up, in a low-traffic area, and connected to the appropriate power source

Performance

Operating Temperatures:

• -40°F to 150°F (-40°C to 66°C) for standard unit with clear PVC hoses
• -20°F to 212°F (-28°C to 100°C) for custom unit with hydraulic hoses and Viton or EPDM seals

Materials:

• Frame: Carbon Steel
• Paint: Industrial Powder Coat
• Filter Heads: Aluminum
• Fittings: Zinc Plated Steel and/or Brass
• Pumps: Aluminum/Steel
• Hoses: Clear PVC with steel wire or hydraulic hose
• Gaskets: Buna-N

Filter Indicators:

• Filter indicator pops at 22 psid (1.55 bar) as warning that filter elements need to be replaced

Pump Relief:

• Opens at 65 psi (5.49 bar)

Weight:

• Approximately 100-150 lbs (45-68 kg). Will vary depending on options selected.

Dimensions:

• 18.8" L x 21.5" W x 45.7" H

Viscosity Range:

• Up to ISO VG 680 at 100°F / 38°C (3000 ssu / 648 cSt)

Filter Replacements

Replacement Filter Element Part Numbers:

Elements are sold in cases of six and can be mixed and matched.