Air Sentry® In-Line Filter / Dryers remove water vapor and solid contaminants from air exhaust lines, low pressure compressed air lines, vacuum lines, and other in-line airflow applications where clean, dry air is required.
The L-Series breathers are available with 100% silica gel or activated carbon, or a combination of both, as necessary.
Air enters the filter / dryer in one end and is clean and dry when leaving the other end. Water vapor and solid particles down to 2 micron are removed. The L-Series is rated up to 60 psi and mounted on the regulated side of the air line. This series offers these benefits:
- Minimize rust and corrosion
- Reduce component wear
- Reduce maintenance costs
- Prolong fluid life
- Reduce oil oxidation
- Eliminate fumes and odors
Typical Applications
- Air Exhaust Lines
- Vacuum Lines
- Low Pressure Compressed
Air Lines
- Marine Vehicles
Model |
Height |
Diameter |
Both Ends
Connection |
Silica Gel |
Maximum
Adsorption
Capacity |
Maximum
Air Flow |
Maximum
Reservoir
Fluid Flow |
Type of Medium |
L-141 |
5.5 in
14.0 mm |
2 in
5.1 mm |
1/2" FNPT |
0.2 lbs
0.1 kg |
1.35 fl oz
39 mL |
4 cfm |
30 gpm |
100% Silica Gel |
L-142 |
8.5 in
21.6 mm |
2 in
5.1 mm |
1/2" FNPT |
0.3 lbs
0.1 kg |
2.32 fl oz
68 mL |
6 cfm |
45 gpm |
100% Silica Gel |
L-143 |
5.5 in
14.0 mm |
3.25 in
8.3 mm |
1/2" FNPT |
0.8 lbs
0.4 kg |
4.91 fl oz
145 mL |
10 cfm |
75 gpm |
100% Silica Gel |
L-144 |
8.5 in
21.6 mm |
3.25 in
8.3 mm |
1/2" FNPT |
1.2 lbs
0.5 kg |
7.87 fl oz
232 mL |
10 cfm |
75 gpm |
100% Silica Gel |
Shipping Dimensions
Weight: 5.00 lbs Length: 0.00 inches Width: 0.00 inches Height: 0.00 inches